1 5

Davco Standard Tile Adhesive 西卡

Davco Standard Tile Adhesive 西卡

₱250.00
₱250.00

DAVCO Standard Tile Adhesive is an economical thick or thin bed (TTB) cement based tile adhesive. Ideal for laying the following tile types: ceramic tiles, baked clay tiles, quarry and most monocottura tiles unto interior and exterior wallsand floors.

Uses
For standard sized tiles (up to 60cm x 60cm) and all porous tiles such as ceramic tiles, ceramic mosaics, baked clay tiles and laterite tiles onto rendered concrete.

Packaging: 25kg Bag

Coverage varies according to surface condition and the buildup required.
Using a 4mm x 4mm notched trowel approx. 2.5kg/m2
Using a 6mm x 6mm notched trowel approx. 3.5kg/m2
Using a 10mm x 10mm notched trowel approx. 5.0kg/m2

 

 

For orders beyond available quantity or unavailable products, click here for bulk preorders, or contact our hotline for assistance.

OTHERS BOUGHT THIS WITH
Davco Standard Tile Grout 西卡

₱65.00

Davco K11 Flex - Cementitious Waterproofing 西卡

₱935.00

View full details

Instructions

MIXING :
Add one 25 kg bag of DAVCO Standard Tile Adhesive to approximately 5 to 6 liters of clean water, mixing continuously until a lump-free, creamy consistency is achieved.

APPLICATION:
Allow the mix to stand for 3-5 minutes; remix then use the adhesive. Spread the adhesive onto the substrate using either a 6mm x 6mm notched trowel for wall tiling, or a 10mm x 10mm notched trowel for floor tiling. The choice of trowel should be determined by the size of the tiles, depth of knobs, grooves or ridges on the back of the tile, and the evenness of the substrate.
• A 6mm x 6mm notched trowel is recommended for the mosaic tiles.
• Thicker bed adhesive allow for better contact to the substrate as well as picking up unevenness especially in the case of slates.
• For tiles with deep grooves or ridges, such as slate or lugged backed tiles, the adhesive should be butter coated onto the back of the tiles in addition to being notched-trowelled onto the substrate.
• Do not spread more than 1 m2 of adhesive at a time. Ensure that the adhesive is wet when the tiles are laid and tapped into position to ensure positive contact with the adhesive.
• Ensure that there are no voids under the tiles.
• Do not allow the adhesive to skin over prior to tiling.
• Allow the mix to stand for 5-10 minutes; remix then use the adhesive.
• Install tiles within the duration of the open time.
• Do not disturb or walk-on tiles until they are laid for 24 hours.

Packaging Dimensions

45cm x 30cm x 10cm

Payment & Shipping

FOR PAYMENT:
(1) Paymongo: Mastercard, VISA, GCash, Maya, Grab Pay
(2) Online Bank Transfer to our BDO, Metrobank, and BPI accountsFor more details, kindly check Accepted Modes of Payment

FOR SHIPPING:
(Customer Location) in Metro Manila (NCR)

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Metro Manila**
Lalamove/ Grab Pin: LPM Construction Supply and Wood Center Corporation


(Customer Location) in Pangasinan

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Pangasinan**
Lalamove/ Grab Pin: LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd. Tayug,
Pangasinan, PH